Hydraulic Welders 3 Phase Generators

The DC200, 225, and 250 are DC welders with single phase 120/240 generator output. An optional three phase is available.

Operating system:
The DC200, 225, and 250 are DC welders with single phase 120/240 generator output. An optional three phase is available. The voltage regulation of the generator output is obtained by a compound winding. A range selector and a curent selector (for a careful adjustment) allow the welding current regulation. The above welders are manufactured in our 100 Series physical dimension. The EW welder series are equipped with DC excitation brushes.

The GW25OTDC-GW30OTDC-GW40OTDC are DC current welders complete with three phase and single phase alternator.

Operating system:
The GW25OTDC-GW30OTDC-GW40OTDC are DC current welders complete with three phase and single phase alternator. The regulation of the generator output voltage and of the welding current is obtained by means of an voltage regulator (AVR) The welders are provided of ARC FORCE, HOT START, ANTISTICK, and modulated threshold. These machines are made in the 140 - 2 poles - brushes series.

Electrical characteristics:
Referred to following conditions: environmental temp. <400 C, height < continuous duty SI, cos p=O, 8.

Type: EW: 2 pole, 1 phase 60 Hz, 3600 RPM	DC Amps	KvA 120V 60 Hz	Duty	Noise (dBA) 7m / 1m		B3/B14 Weight (kg)	J609 Weight (kg)
EW 200	200	3.5	45%	6.0	7.7	36.9	34.4
EW 225	225	4,2	65%	6.0	7.7	45.4	42.9
EW 250	250	5.5	65%	6.0	7.7	46.4	43.9

Type: GW: 2 pole, 1&3 phase 60 Hz, 1800 RPM	DC Amps	KvA 60 Hz 120V \| 240V		Duty	Noise (dBA) 7m / 1m		B3/B14 Weight (kg)	J609 Weight (kg)
GW 300 T DC	300	8	16	70	69	86	105	121
GW 400 T DC	400	8	16	70	69	86	134	150

Getec Incorporated
1107 Old Route 17
P.O. Box 583
Ferndale, New York 12734
Phone (845) 292-0800
Fax (845) 292-0830
Email: sales@getecinc.com