Loading

The EK Series are synchronous, self-regulating, brushless, single-phase generators. Operating system: The self excitation is obtained through a stator winding angularly positioned with respect to the power winding and charged by a capacitor; the load voltage self-compensation is due to the rectification of the voltage induced by the inverse field in the rotor. Electrical characteristics: Referred to following conditions: environmental temp: <40&#deg C, height: < 1000 m a.s.l., continuous duty S1, cos pf=1 Short circuit current: More than 3 times the rated full load current.

The ET Series are synchronous three phase AC generators. Operating system: The 3 phase AC generators are manufactured in sizes 5 to 13 Kva. The physical dimensions are equal to the 100 series. The voltage is controlled by a compound transformer. The generator is also equipped with excitation brushes. Electrical characteristics: Referred to following conditions: environmental temp. <40&#deg C, height < 1000 m a.s.l., continuous duty S1, cos pf=0.8

The GS 140 series are 3-phase, synchronous with brushes, alternators. 2 poles - 3000 / 3600 RPM Operating system: These three phase AC generators are manufactured in sizes 17 to 47.4 KvA. The physical dimensions are equal to the 140 series. The voltage is controlled by compound transformer. The generator is also equipped with excitation brushes. Electrical characteristics: Referred to following conditions: environmental temp: <40&#deg C, height: < 1000 m a.s.l., continuous duty S1, cos =0.8

The KS 140 series are synchronous, self-regulating, brushless, single-phase generators. Operating system: The self excitation is obtained through a stator winding angularly positioned with respect to the power winding and charged by a capacitor; the load voltage self-compensation is due to the rectificatiton of the voltage induced by the inverse field in the rotor. Electrical characteristics: Referred to following conditions: environmental temp: <40&#deg C, height: < 1000 m a.s.l., continuous duty S1, cos =1. Short circuit current: More than three times the rated full load current.

Type: EK: 2 pole, 1 phase 60 Hz, 3600 RPM	KvA	% Eff	Air Movement m3 / min	Noise (dBA) 7m / 1m		B3/B14 Weight (kg)	SAE Weight (kg)
EK 3.7	3.7	73	5.3	6.0	7.7	20	18.6
EK 5.2	5.2	77	5.3	6.0	7.7	24	21.7
EK 6.2	6.2	77.5	5.3	6.0	7.7	28	25.4
EK 7.5	7.5	80	5.2	6.0	7.7	33	30.5
EK 8.8	8.8	84	5.2	6.0	7.7	35.5	35.0
EK 10.	10.0	84	5.2	6.0	7.7	38	35.0
ET: 2 pole, 3 phase, 60 Hz, 3600 RPM
ET 5.0	5.0	73.5	5.2	6.0	7.7	27.6	25.1
ET 6.9	6.9	76	5.2	6.0	7.7	30.8	28.3
ET 9.0	9.0	80	5.2	6.0	7.7	34.8	32.3
ET 10.5	10.5	82	5.2	6.0	7.7	39.3	36.8
ET 13.0	13.0	84	5.2	6.0	7.7	43.7	41.2

Type: 2 pole 60 Hz 3600 RPM	KvA	% Eff	Air Movement m3 / min	Noise (dBA) 7m / 1m		B3/B14 Weight (kg)	SAE Weight (kg)
GS 140 S T2 A	17	78	6.3	69	86	58	74
GS 140 S T2 B	20.5	80	6.3	69	86	63	79
GS 140 M T2 A	27.5	83	6.4	69	86	79	95
GS 140 M T2 B	34	85	6.4	69	86	97	113
GS 140 L T2 A	40	86	6.4	69	86	105	121
GS 140 L T2 B	47.5	88	6.4	69	86	124	140
4 pole; 60 Hz 1800 RPM
GS 140 S T4 A	8	75	4.1	54	62	50	66
GS 140 S T4 B	10	78	4.1	54	62	55	71
GS 140 S T4 C	12.5	79	4.1	54	62	64	80
GS 140 M T4 A	16.9	81	4.1	54	62	77	93
GS 140 M T4 B	20	83	4.1	54	62	88	104
GS 140 L T4 A	28	85	4.1	54	62	115	131
GS 140 L T4 B	34	86	4.1	54	62	125	141

Type: 2 pole 60 Hz, 3600 RPM	KvA	% Eff	Driving Power 4/4 kW	Air Movement m3 / min	Noise (dBA) 7m / 1m		B3/B14 Weight (kg)	SAE Weight (kg)
EK 140 S 2 A	10.5	74	14	6.3	69	86	50	66
EK 140 S 2 B	13.5	77	17.5	6.3	69	86	55	71
KS 140M M2A	18.5	80	23	6.6	64	81	70	86
KS 140M M2B	22	82	26.5	6.6	64	81	90	106
KS 140L M2A	25	84	29.5	6.6	64	81	98	114
KS 140L M2B	31	86	36	6.6	64	81	117	133
4 pole; 60 Hz, 1800 RPM
EK 140 S 4 B	6.2	77	7.5	4.1	54	62	47	63
EK 140 S 4 C	8.1	79	9.5	4.1	54	62	56	72
KS 140M M4A	10	81	12	4.1	54	62	69	85
KS 140M M4B	12.5	82	15	4.1	54	62	80	96
KS 140L M4A	16.9	83	20	4.1	54	62	107	123
KS 140L M4B	20	84	23	4.1	54	62	118	134

Home

Item # ____ Description: GS,KS-100 1 _____ 140 B3/B14 Front Shield 2 _____ IP21 Front Grid 3 _____ Bearing Type 6308 2 RS C3 4 _____ 140 Fan 5 _____ 8 X 55 Key 6 _____ Wound Rotor 7 _____ Cable Cover Disk 8 _____ 7 X 30 Key 9 _____ Case and Stator 10 ____ 140 Lifting Eye 11 ____ Bearing Type 6307 2 RS C3 12 ____ 140 Rear Shield 13 ____ Assembled Base Plate 14 ____ 1000/35 Rectifier Bridge 15 ____ Slipring 16 ____ Slipring Cover 17 ____ Brush Holder and Brushes 18 ____ 140 Rear Grid 19 ____ 140 Rear Shield Cover 20 ____ Disk Joint 21 ____ Flange 22 ____ Flange-Grid

Item # ____ Description: ET-100 1 _____ Front grid IP21 2 _____ Front grid IP23 3a ____ Front Shield J609A 3b ____ Front Shield J609B 3c ____ Front Shield B3-B14 4a ____ Fan 4b ____ Fan with hole for J609B 5a ____ Rotor 100 - 3 ph 5.0 5b ____ Rotor 100 - 3 ph 6.9 5c ____ Rotor 100 - 3 ph 9.0 5d ____ Rotor 100 - 3 ph 10.5 5e ____ Rotor 100 - 3 ph 13.0 6 _____ Bearing 7a ____ Compound for 100 - 3 ph 5.0 208V 7b ____ Compound for 100 - 3 ph 6.9 208V 7c ____ Compound for 100 - 3 ph 9.0 208V 7d ____ Compound for 100 - 3 ph 10.5 208V 7e ____ Compound for 100 - 3 ph 13.0 208V 8a ____ Black top cover 8b ____ Red top cover 9a ____ Blank panel 9b ____ Three phase panel 10 ____ EMC filter 11 ____ Field rectifier bridge 12 ____ Brush-holder & brushes & varistor 13 ____ End cover 14 ____ Tap 15a ___ Blank end cover 15b ___ Three phase panel 16 ____ Tap 17 ____ Slip ring cover 18 ____ Slip ring 19a ___ Housing M & Stat. 100 - 3 ph 5 208V 19b ___ Housing M & Stat. 100 - 3 ph 6.9 208V 19c ___ Housing M & Stat. 100 - 3 ph 9 208V 19d ___ Housing M & Stat. 100 - 3 ph 10.5 208V 19e ___ Housing M & Stat. 100 - 3 ph 13 208V 20 ____ Stay bolt - M8 * 30 21 ____ Shaft stay bolt 22 ____ KIT : from J609B to B3/B14

Item # __ GETEC # ________ Description: EK-100 2 ____ 600869 __ Front Grid 3a ___ 600870 __ Front Shield J609A 3b ___ 600871 __ Front Shield J609B 3c ___ 600872 __ Front Shield B3-B14 4a ___ 600873 __ Fan 4b ___ 600874 __ Fan with hole for J609B 5a ___ 600875 __ Rotor E100 3.7 5b ___ 600876 __ Rotor E100 5.2 5c ___ 600877 __ Rotor E100 6.2 5d ___ 600878 __ Rotor E100 7.5 5e ___ 600879 __ Rotor E100 8.8 5f____ 600880 __ Rotor E100 10.0 6 ____ 600881 __ Diode, Varistor, EMC Capacitor 7 ____ 600882 __ Bearing 8a ___ 600883 __ Black top cover 8b ___ 600884 __ Red top cover 9a ___ 600885 __ Blank E100 panel 9b ___ 600886 __ Single phase panel 10 ___ 600887 __ End cover 11 ___ 600888 __ Tap 12a __ 600889 __ Black E100 end panel 12b __ 600890 __ Black end panel 13 ___ 600891 __ Tap 14a __ 600892 __ Capacitor 20 uF 450 14b __ 600893 __ Capacitor 25 uF 450 14c __ 600894 __ Capacitor 30 uF 450 14d __ 600895 __ Capacitor 40 uF 450 15 ___ 600896 __ Capacitor block spring 16a __ 600897 __ Housing M & Stat. E100 3.7 16b __ 600898 __ Housing M & Stat. E100 5.2 16c __ 600899 __ Housing M & Stat. E100 6.2 16d __ 600900 __ Housing L & Stat. E100 7.5 16e __ 600901 __ Housing L & Stat. E100 8.8 16f___ 600902 __ Housing L & Stat. E100 10. 17 ___ 600903 __ Bolt - M8 * 30 18 ___ 600904 __ Shaft bolt 19a __ 600905 __ Black top cover 19b __ 600906 __ Red top cover 20 ___ 600907 __ KIT: from J609B to B3/B14

Getec Incorporated
1107 Old Route 17
P.O. Box 583
Ferndale, New York 12734
Phone (845) 292-0800
Fax (845) 292-0830
Email: sales@getecinc.com

Website Design by Matt Wolf Web Media - MattWolf.com -