Loading
Loading
|
|
|
|
 | | |
 | | |
|
|
DESCRIPTION: BELT-DRIVEN AC GENERATORS
You now can have electric power anytime or anywhere you drive or sail
without carrying an engine generator plant. Most installations can be accomplished in less than 4 hours
and can easily be removed and reinstalled on new vehicles. The kit comes with just about all the parts
required for a good installation (Engine pulleys and belts not included).
USES:
The GETEC "Mighty-Max"will operate almost all electrical tools and appliances, such
as drills, grinders, lights, blowers, vacuums, pumps, electric motors, televisions, radios, stoves, microwaves,
electric typewriters and computers.
Complete Kits consisting of: Generator - Control Panel - Mounting Plate - Adjustment Bar - U-Bracket - Mounting Straps - Throttle Cable with Clip - Hardware and Instruction Book. |
|
VOLTAGE REGULATION:
Constant voltage control can be obtained by the used of
the optional voltage limiter (V.L. 12). The device will
not allow the voltage to rise above the standard 125 V
(factory set). If required, the V.L. 120 can be field
adjusted to limit the output of the
"Mighty-Max" anywhere between 100 - 145 V AC.
The optional V.L. 120 is only required when the
"Mighty-Max" is operated at varying engine
RPM's (such as over the road operations).
DELUXE CONTROL PANEL:
Includes voltmeter, on-off switch, field excitation
indicator, 4 outlets (GFI optional), automatic overload
trip, and GETEC's "auto-off" optional feature.
This feature eliminates dead batteries, should the
operator forget to turn off the excitation switch when
vehicle engine is off. | |
| |
 |  |
|
ENGINE WIRING:
When installed on any engine, the "Mighty-Max"
wiring will not alter or affect the engine's own
electrical wiring. The two electrical systems are totally
isolated from each other.
OUTPUT:
Output voltage of the "Mighty-Max" alternator
is in direct relationship to the engine RPM. In most
instances, the pulley ratio is approximately 2.5 to 1.
That means that in order to produce 120 V AC and 60 Hz.
(3600 generator RPM), your engine will turn approximately
1400 RPM. This RPM is ideal to maintain the engine at its
designed operating temperature and most economical
efficiency. If a non-standard voltage is required, this
can be accomplished by simply increasing or decreasing
the engine RPM. At 3700 watt, the "Mighty-Max"
will require only 8 HP of your engine. When not in use,
the "Mighty-Max" will demand only a fraction of
a horsepower
|
| QUALITY FEATURES | ||
3700 & 4600 Watt Peak Units |
Overload protected |
|
|
Compact Size |
Epoxied armature for overspeed protection |
|
|
Dynamically Balanced Armature |
Almag Endplates |
|
|
Lifetime Lubricated Bearings |
Self Adjusting Brushes |
|
| ||
| MODEL | Peak Output |
Volt | Excitation | RPM | Weight | Size | Off | On |
| M-37 | 3700 Watt | 120 VAC | 12 VDC 14.5 A |
3600 | 29 lbs. | 10.5 Long 5" Dia. |
.2 | 7.5 |
| M-46 | 4800 Watt | 120 VAC | 12 VDC 14.5 A |
3600 | 38 lbs. | 10.5" Long 5.25" Dia. |
.2 | 8.5 |
 |
  |
|
|
|
